Description
Premium Light Filtering Sheer Shades are beautifully elegant, light and airy. These sheer shades combine the light and privacy control of a horizontal blind with the soft look of a fabric shade. Floating vanes are suspended between graceful sheer fabric and provide you with control over privacy and light. The vanes smoothly rotate like slats on a blind, permitting a wide range of light control. These shades are available in 21 designer colours.
Features
- Hardware colours will be matched to fabric accordingly. They are: White, Black, Espresso, Alabaster, and Anodized Aluminum
- Colour-coordinated fabric-insert cassette.
Options
- Motorized lift system
- Motorized Wand
- Continuous Cord Loop - Chain Guard System
- No-drill installation headrail option
Recommendations and Limitations
- For all mounting types, the shade will measure the length ordered when the vanes are in the open or “view-through” position.
- The vanes overlap each other when closed, blocking the view.
- Fabric telescoping may occur on shades with a height-to-width ratio greater than 3:1 (height is more than 3 times the width). Telescoping blinds may cause your shades to roll unevenly or fray your fabric.
- 2 blinds on 1 headrail is required over 84 inch width for Motorization.
- 2 blinds on 1 headrail is required over 84 inch for Wand Lift.
- Please note; there is minimal contact amongst the vanes along the full length of the shading and thus there is not a full seal against light leakage (most visible toward the bottom of the shading).
- Inside mount: Fabric will measure ordered width less 1 3/8". Cassette will measure 1/4" less than ordered width. Do not attempt to account for fabric deductions by changing measurements on inside mount shades.
- Outside mount: Fabric will measure ordered width less 1 1/8". Cassette will measure ordered width. Do not attempt to account for fabric deductions by changing measurements on outside mount shades.
- Minimum depth for side mount: 1 1/2".
- Maximum shade width for side mount: 48".
- Side mount: Fabric will measure ordered width less 1 1/8". Cassette will measure ordered width less 1/4". Total height will measure ordered height less 1/4". Do not attempt to account for fabric deductions by changing measurements on side mount shades.
- Light Gap: Clutch: 5/8" Idle End: 1/2”.
- The locking mechanism on the No-Drill Blinds Headrail will be located on the right side.
- No-drill installation headrail max width: 72”. Max height: 60”.
- IMPORTANT MEASURING TIP: If the no-drill installation headrail is chosen, measure the exact width of the top of your window frame and use those measurements as your width. Do NOT take the smallest of the three measurements, which may cause your headrail to not fit properly.
- Chain guard shroud is transparent
- Chain guard length is based on the height of the shade ordered:
Length of Shade |
Length of Chain Guard |
---|---|
0-36" |
18" |
36"-48" |
24" |
48"-72" |
36" |
72"-96" |
48" |
96"-120" |
60" |
120"-144" |
72" |
Specifications and Installation | |
---|---|
Width |
|
Height |
|
Min inside-mount depth |
|
Min outside-mount space |
|
Headrail Dimensions |
|
WARNING
STRANGULATION HAZARD — Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.
Customer Photos
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes