Description
A distinctive look that makes a statement, this revolutionary sheer shade adds personality to any room. These zebra shades are made with two pieces of fabric, which both have alternating panels/bands. When the bands on both pieces of fabric are matched together, you get the look of horizontal blinds when open, including an outside view and natural light filtering into the room. To block the light and increase your privacy, you simply rotate the fabric so the solid colour bands fill the entire shade, giving the look of a traditional roller shade. Choose from 19 colours and patterns to match any decor.
Features
- Hardware colours will be matched to fabric accordingly. They are: White, Black, Espresso, Alabaster, and Anodized Aluminum.
Options
- Please specify ceiling or wall mount installation brackets.
- Available in motorized lift system.
- Wand lift system
- Motorized Wand
Recommendations and Limitations
- In order to ensure uniform fabric alignment, it is critical that you indicate on your order whether shades are to be installed side-by-side or in the same room.
- Fabric colour can vary from one dye lot to another. To ensure that all materials are from the same dye lot, please order shades for the same room at the same time.
- Fabric telescoping may occur on shades with a height-to-width ratio greater than 3:1 (height is more than 3 times the width). Telescoping blinds may cause your shades to roll unevenly or fray your fabric.
- Fabrics in the Classic and Designer Collection have 3" solid bands. Fabrics in the Deluxe Collection have 4" solid bands.
- 2 blinds on 1 headrail is required over 90 inch width for Motorization.
- 2 blinds on 1 headrail is required over 84 inch for Wand Lift.
- Inside mount: Fabric will measure ordered width less 1 3/8". Cassette will measure 1/4" less than ordered width. Do not attempt to account for fabric deductions by changing measurements on inside mount shades.
- Outside mount: Fabric will measure ordered width less 1 1/8". Cassette will measure ordered width. Do not attempt to account for fabric deductions by changing measurements on outside mount shades.
- Maximum shade width for side mount is 48".
- Minimum depth for side mount: 1 1/2".
- Side mount: Fabric will measure ordered width less 1 1/8". Cassette will measure ordered width less 1/4". Total height will measure ordered height less 1/4". Do not attempt to account for fabric deductions by changing measurements on side mount shades.
- Light Gap: Clutch: 5/8"” Idle End: 1/2”.
- Wand lift system is white.
- Wand lift length is based on the height of the shade ordered:
|
Length of Shade |
Length of Wand |
|---|---|
|
0-48" |
24" |
|
48"-72" |
36" |
|
72"+ |
48" |
| Specifications and Installation | |
|---|---|
| Width |
|
| Height |
|
| Min inside-mount depth |
|
| Min flush-mount depth |
|
| Min outside-mount space |
|
| Headrail dimensions |
|
WARNING
STRANGULATION HAZARD — Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.
