Description
Top-down bottom-up window coverings are the ideal solution for maximizing privacy and light control at the same time.
Want more natural light to come into the room? Simply lower the shade from the top while still maintaining your privacy with the shade shut at the bottom. If you want full privacy, simply raise the middle bar to the top so that the light filtering shade covers the entire window. Or for more visibility to the outside, use the cordless lift system to raise the shade from the bottom.
The stylish, single-cell 3/4” insulated pleats are crafted from 100% polyester, and incorporate energy-efficient construction for improved insulation, keeping your home cooler in the summer and warmer in the winter.
Features
- Cordless top-down bottom-up operation
- 3/4” single cell construction
- White inner bands (for top-down bottom-up functionality)
- Soft, thick 100% spun lace fabric helps absorb sound for quieter, more comfortable rooms
- Colour-coordinated rails and components for a sophisticated, finished look from top to bottom
- Includes all mounting hardware
- Colours match our 3/4" Single Cell Value Plus Light Filtering Honeycomb Shades and 1/2" Double Cell Value Light Filter Honeycomb Shades
Option:
- No-drill installation option upgrade
Recommendations and Limitations
- To operate the middle rail, the bottom rail must be snapped into the hold down brackets. If you do not install the hold down brackets, the bottom rail will move when moving the middle rail. To operate the bottom rail, simply remove the bottom rail from the hold down brackets and raise and lower the rail.
- White fabric on backside (streetside) of shade maintains uniform look to exterior.
- Inside mount: Additional 1/4" (+/- 1/8") headrail deduction taken at factory. No deduction taken on outside mounted shades.
- Inside mount: Additional 3/8” (+/- 1/8") fabric deduction on width and 1/2” (+/- 1/8") fabric deduction on height taken at factory.
- Outside mount: Additional 1/8” (+/- 1/8") fabric deduction on width taken at factory. No deduction taken on height.
- Shades over 42” in width will have two cordless handles along the bottom and middle rail to ensure level movement. Shades under 42” in width will have one cordless handle.
- Hold down brackets are required and must be installed for the shade to operate properly.
- No-drill Headrail is only available in the colour white.
- No-drill headrail option is only available for inside mount.
- No-drill headrail max width: 84”. Max height: 84”. 2 1/8" of depth to install required.
- The locking mechanism on the no-drill installation headrail will be located on the right side.
- IMPORTANT MEASURING TIP: If the no-drill installation headrail is chosen, measure the exact width of the top of your window frame and use those measurements as your width. Do NOT take the smallest of the three measurements, which may cause your headrail to not fit properly.
Specifications and Installation | |
---|---|
Width |
|
Height |
|
Min Inside-Mount Depth |
|
Min Flush Inside-Mount Depth |
|
Min Outside-Mount Space |
|
WARNING
STRANGULATION HAZARD — Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.
Customer Photos
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes