Description
Select Room Darkening Zebra Blinds offer you the ultimate in light and privacy control. Featuring alternating solid room darkening bands and sheer bands, these zebra blinds allow you to adjust the amount of incoming natural light. The unique design, reminiscent of zebra stripes, adds a modern and chic touch to any space.
To let more light into the room, simply match up the solid bands. To block out light and enhance privacy, simply rotate the fabric so the solid colour bands cover the entire shade. You can also raise the shade for a full view to the outside.
Choose the No Drill Blind Headrail option to install your zebra blinds in minutes without any tools. Just snap the headrail into place and insert your window shade. No tools, no holes, no hassle!
If you prefer to let more light into the room, check out our Select Light Filtering Zebra Blinds.
Features
- Continuous Cord Loop - Safety Guard System
- 100% polyester fabric
Options
- Motorized lift system
- No-drill installation headrail option
Recommendations and Limitations
- Inside mount: Factory will deduct approximately 1/4” from the headrail and 1 ¾” from the fabric to ensure a proper fit.
- Outside mount: Factory will deduct approximately 1 1/2" from fabric. No deduction taken on headrail.
- Deductions may vary +/- 1/8". Do not account for factory deductions when measuring for your shade.
- Products come with 6" of extra fabric to conceal roller.
- Shade must be installed evenly to avoid fraying on sides.
- Do not remove band around shade until fully installed to avoid fraying on sides of shade.
- All brackets are white and will be visible at the top of the headrail.
- No-drill installation headrail comes in white and is only available for inside mount.
- No-drill installation headrail requires 2 1/2" of depth to install.
- Factory will deduct approximately 5/8” off of the no-drill installation headrail regardless of lift style and 1/2” off of the width and height of your fabric.
- The locking mechanism on the no-drill installation headrail will be located on the opposite end of the control side selected for Safety Guard. The locking mechanism will be located on the right side for Cordless and Motorized options.
- IMPORTANT MEASURING TIP: If the no-drill installation headrail is chosen, measure the exact width of the top of your window frame and use those measurements as your width. Do NOT take the smallest of the three measurements, which may cause your headrail to not fit properly.
- Safety Guard shroud is transparent.
- Safety Guard length is based on the height of the shade ordered:
Length of Shade |
Length of Safety Guard |
---|---|
0-29 1/2" |
11 4/5” |
29 1/2" - 45 1/4" |
15 ¾” |
45 1/4" - 57" |
27 5/9” |
57" - 71" |
39 3/8” |
71" - 90.5" |
47 ¼” |
90.5" + |
63” |
Specifications and Installation | |
---|---|
Width |
|
Height |
|
Min inside-mount depth |
|
Min flush-mount depth |
|
Min outside-mount space |
|
Headrail dimensions |
|
WARNING
STRANGULATION HAZARD — Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.