Description
Introducing the exquisite William Morris Light Filtering Roller Shades, part of our collaboration with the Victoria and Albert Museum. This captivating collection showcases a range of classic William Morris prints, including the enchanting Honeysuckle and Tulip, the vibrant Marigold, the iconic Strawberry Thief, and the radiant Sunflower.
These roller shades are not only functional window coverings, but also works of art that will transform your interiors with their timeless beauty and enduring charm.
Features
- Cordless lift system
- Standard or reverse roll
Options
- Motorized lift system upgrade
- Colour-coordinated fabric-insert cassette
- No-drill installation headrail option
- Continuous Cord Loop - Safety Guard System
Recommendations and Limitations
- Cordless lift: Fabric width will be approximately 1-1/8" smaller than ordered width on inside mounted shades, and 7/8" smaller than ordered width on outside mounted shades. Deductions taken at factory.
- Motorized lift with exposed roll: Fabric width will be approximately 1-1/2" smaller than ordered width on inside mounted shades and 1-1/8" smaller than ordered width on outside mounted shades. Deductions taken at factory.
- Motorized lift with cassette: Fabric width will be approximately 1-7/8" smaller than ordered width on inside mounted shades, and 1-1/2" smaller than ordered width on outside mounted shades. Deductions taken at factory.
- Inside Mount: 1/4" deduction off headrail with cassette or exposed roll. No deduction will be made for outside mount.
- Deductions may vary +/- 1/8.
- Cassette will be white and fabric wrapped based on fabric chosen. Bottom rail is fabric wrapped to match.
- Do not attempt to compensate for the fabric deductions taken during manufacturing for inside mount applications. Adjusting the measurement could result in the shade not fitting inside the window opening. Some lift systems require more room on the roller to operate, resulting in a slightly larger light gap on one side.
- The locking mechanism on the no-drill installation headrail will be located on the opposite end of the control side selected for Safety Guard. The locking mechanism will be located on the right side for Cordless and Motorized options.
- IMPORTANT MEASURING TIP: If the no-drill installation headrail is chosen, measure the exact width of the top of your window frame and use those measurements as your width. Do NOT take the smallest of the three measurements, which may cause your headrail to not fit properly.
- Safety Guard shroud is transparent
- Safety Guard length is based on the height of the shade ordered:
Length of Shade |
Length of Safety Guard |
---|---|
0-29 1/2" |
11 4/5” |
29 1/2" - 45 1/4" |
15 ¾” |
45 1/4" - 57" |
27 5/9” |
57" - 71" |
39 3/8” |
71" - 90.5" |
47 ¼” |
90.5" + |
63” |
Specifications and Installation | |
---|---|
Width |
|
Height |
|
Min inside-mount depth |
|
Min flush-mount depth |
|
Min outside-mount space |
|
WARNING
STRANGULATION HAZARD — Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? No
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes