Renowned “design hunter” Veronica Valencia has masterfully designed hundreds of homes for shows on ABC, NBC, FOX and OWN. The exclusive Veronica Valencia Blackout Honeycomb Shades block virtually all light from the outside while offering privacy, making them an ideal addition to your bedroom, nursery or home theatre room.
These soft-spun linen-like blackout honeycomb shades give your space a refreshing splash with today’s trendiest colours, personally selected by Veronica Valencia for Select Blinds Canada. The ½” single cell-pleats are ideal for narrow windows and add a chic and modern look and feel to enhance any room in the house. These designer shades are also energy efficient, keeping your room warmer in the winter and cooler in the summer.
Choose from a wide range of options, including a brushed nickel or oil-rubbed bronze headrail for a more polished finish. Or, for added convenience and safety, choose between our Cordless Lift 'n Lock, Top Down Bottom Up, and advanced motorized lift systems.
Top down bottom up:Left cord controls bottom rail, right cord controls middle rail
White on backside of fabric
Veronica Valencia custom-designed fabric and patterns for Select Blinds Canada
Small stacking, 1/2” single-cell pleats
Choose from oil rubbed bronze and brushed nickel hardware
The Cordless Lift n' Lock feature is cord free and is essential for providing child and pet safety. Simply push the button and lower or raise the shade to the desired position. Release the button at any point to lock the moving rail.
The top down bottom up option uses two sets of lift cords which enables the shade to be opened by lowering the top down or by lifting the bottom up.
Minimum width: 8"
Maximum width: 108"
Minimum height: 8"
Maximum height: 120"
Cordless conforms with CPSC child-safety guidelines
Motorization: min. width 18", max. width 96"
Inside mount deduction (taken at factory): 3/8” off fabric and 3/16” off headrail (plus or minus 1/8”)
Outside mount: Fabric width as ordered, ¼” added to headrail at factory, plus or minus 1/8”
No side mount brackets available for cordless headrails
Cordless Lift 'n Lock: width 16"-96", height 8"-84"
Cordless Lift 'n Lock Top Down Bottom Up: width 20"-96", height 8"-84"
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
*Headrail will be made 1/4" less than width ordered, including endcaps. Fabric will be made 1/2 inch less than width ordered.
3/4" Express Light Filter Cordless headrail and fabric will be 1/4" smaller than
width ordered. 1/2" Double Cell Light Filter Extreme Honeycomb headrail and fabric will be made 3/8” smaller than width ordered. End caps add approximately 1/8" width to the
Please be sure to measure exactly as instructed BUT NOT TAKE OFF ANYTHING FROM THE MEASUREMENTS TO ALLOW FOR FREE SPACE since we automatically take deductions from the measurements on your order to provide for this free space.
If you are planning to do a flush mount, please ensure that you have the space required to do so--you'll find the 'Flush mounting space required' under the Features tab for your blinds.
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
NOTE: Width and length measurements may vary +/- 1/8”
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind or shade to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 72", it might be helpful to order 76". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Fabric will be made at ordered width and headrail will be ordered width plus ¼”
Write down that size making sure that it is the first number of the measurement.
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 50” this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
*width and length measurements may vary +/- 1/8”
professional measuring & installation service
Would you like a professional to measure your windows before you order your blinds?