WE NOT ONLY MEET THE BEST PRICE, WE BEAT IT BY 50%
Simply find a lower price from any other Canadian retailer within 60 days of your purchase, and we will match it PLUS give you an extra 50% of the price difference. We will not only meet but beat the price of any other retailer, anywhere! This price guarantee works whether you buy a single blind or blinds for an entire home.
Click here to submit your Price Match request
SheerWeave Sliding Panel Track Blinds from SelectBlindsCanada.ca are an ideal window covering for patio doors, sliding doors and larger windows. They can also be used as a room divider. The solar shade material provides both privacy and light control while keeping out harmful UV rays.
These Sliding Panel Track Blinds are easy to install and simple to use. The panels are attached to the sliding track with a velcro heading and a bottom bar maintain's the panel's appearance. The sliding tracks are normally attached to the ceiling, or if you prefer, can be attached to the wall.
Shades block 97% of all harmful UV rays
Conforms with C.P.S.C. child safety guidelines
Mounts to the ceiling or wall
Cord or Wand Control
Left, Right or Split Stacking
PVC Valance available
Minimum width: 36"
Maximum width: 108"
Minimum height: 48"
Maximum height: 144"
Includes all mounting hardware
Openness Factor: approx. 3%
Minimum mounting space for inside mount 2"
Flush mounting space required for inside mount 2.5"
25% Polyester, 75% Vinyl on Polyester
Sun control product. Not a privacy shade
shipping & production info
Shipping is FREE to Canada on all blinds under 94 inches wide (verticals under 94” long).
Blinds 94 inches and over may incur an oversize handling fee.
1. Measure the width of the window at the top. The factory will automatically deduct 1/4" for clearance. Measure the height of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the shade height. The factory will automatically deduct 1/2".
1. Measure the width of the window and add 4" to each side for light blockout and privacy. Give this measurement when ordering. Measure the exact height of the window in 2 places and use the greater height. Add the recommended overlap of 3" top and bottom for a total overlap of 6". Give this measurement when ordering.
Notes: Blinds installed on windows near wall or baseboard heaters must clear the heaters by 12" above and 6" to the side.
1. Follow the Inside Mount instructions above with exceptions noted here. For wall-to-wall installation, specify exact width at ceiling height, factory will automatically deduct 1/4". For ceiling to floor shades, measure to the top of the carpet pile in 3 places, use the smallest measurement. Factory will automatically deduct 3/4".
1. Measure the exact width of the patio door. A minimum 4" addition on each side is recommended. Measure height from top of frame to floor and add 3” above the door and 1/2" of space above the floor for proper clearance.
professional measuring & installation service
Would you like a professional to measure your windows before you order your blinds?