1/2" Single Cell Premium Plus Light Filtering Vertical Honeycomb
WE NOT ONLY MEET THE BEST PRICE, WE BEAT IT
Simply find a lower price from any other retailer within 60 days of your purchase, and we will match it PLUS give you an extra discount on Price Matches from any retailer, anywhere! This price guarantee works whether you buy a single blind or blinds for an entire home.
Click here to submit your Price Match request
The 1/2" Single Cell Premium Plus Light Filtering Vertical Honeycomb shades are window treatments utilizing standard honeycomb fabrics, sliding left to right on a single overhead track.With a variety of stack options and a sleek valance, these shades bring beauty and convenience to any room, while especially useful over sliding doors, wide windows, and room dividers. This product comes in 22 beautiful light filtering colors and like all Selectblinds products comes with a lifetime guarantee. Many of theses colours are available in horizontal patterns with the 1/2" Single Cell Premium Plus Light Filter Honeycomb.
Comes standard with a sleek valance
Cellular fabric slides smoothly side to side along a horizontal rail
Proven roller hardware is exceptionally quiet and keeps the pleats perpendicular with the floor.
The sleek Ovation valance matches the white aluminum head rail for a polished, clean look
Made out of non-woven polyester
Limited Lifetime Warranty
1/2" single cell pleats
No cords, chains, or wands exposed making for enhanced safety around children and pets
Avaialable in 4 stack options
Minimum width: 12"
Maximum width: 120"
Minimum height: 24"
Maximum height: 96"
Fabric is white to the outside
Available in 22 energy efficient colours
Total stack width of 6"
Minimum Mounting Depth, Installation Bracket for inside mount: ¾”
Minimum Mounting Depth for Flush Mount on inside mount: 3 5/8"
With outside mount the valance is equipped with standard 3 1/8” returns.
shipping & production info
Shipping is FREE to Canada on all blinds under 94 inches wide (verticals under 94” long).
Blinds 94 inches and over may incur an oversize handling fee.
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
*Headrail will be made 1/4" less than width ordered, including endcaps. Fabric will be made 1/2 inch less than width ordered.
3/4" Express Light Filter Cordless headrail and fabric will be 1/4" smaller than
width ordered. 1/2" Double Cell Light Filter Extreme Honeycomb headrail and fabric will be made 3/8” smaller than width ordered. End caps add approximately 1/8" width to the
Please be sure to measure exactly as instructed BUT NOT TAKE OFF ANYTHING FROM THE MEASUREMENTS TO ALLOW FOR FREE SPACE since we automatically take deductions from the measurements on your order to provide for this free space.
If you are planning to do a flush mount, please ensure that you have the space required to do so--you'll find the 'Flush mounting space required' under the Features tab for your blinds.
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
NOTE: Width and length measurements may vary +/- 1/8”
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind or shade to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 72", it might be helpful to order 76". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Fabric will be made at ordered width and headrail will be ordered width plus ¼”
Write down that size making sure that it is the first number of the measurement.
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 50” this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
*width and length measurements may vary +/- 1/8”
professional measuring & installation service
Would you like a professional to measure your windows before you order your blinds?