WE NOT ONLY MEET THE BEST PRICE, WE BEAT IT BY 50%
Simply find a lower price from any other Canadian retailer within 60 days of your purchase, and we will match it PLUS give you an extra 50% of the price difference. We will not only meet but beat the price of any other retailer, anywhere! This price guarantee works whether you buy a single blind or blinds for an entire home.
Click here to submit your Price Match request
Premium Faux Wood blinds are one of our best selling and most popular products. Faux wood offers the best of both worlds, with its low maintenance material and contemporary, refined look. With very high resistance to the extremes of heat and moisture, Premium Faux Wood shades are an ideal choice for areas which experience temperature extremes in the summer or winter. Like all our products, these blinds come with our limited lifetime warranty as well as free shipping.
These shades are blackout rated - 3 out of 5 If you are looking for a greater degree of blackout (only a rating of 5 will ensure virtually complete darkness), please see our selection of other blackout blinds and shades.
features
This product features a concealed valance clip.
3" Crown valance gives a contemporary, refined look
Includes all mounting hardware
Limited lifetime warranty
options
Standard Controls only - Cord tilt left/lift cord right
Cord Tilt Only
Cotton Tapes not available
2 on 1 headrail and 3 on 1 headrail not available
Cut outs not available
Motorization not available
specifications
Minimum width: 18"
Maximum width: 71"
Minimum height: 12"
Maximum height: 96"
2" x 2 1/4" Full Size Metal Headrail.
Flush mounting space required for inside mount 3"
Outside Mount flat space required 2 1/4"
Minimum Mounting Space Required 1 1/8"
Due to a possible difference in dye lot we do not recommend that you order a combination of this product with the 2" Premium Plus product.
shipping & production info
Shipping is FREE to Canada on all blinds under 94 inches wide (verticals under 94” long).
Blinds 94 inches and over may incur an oversize handling fee.
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
*production department will deduct 1/4 inch of width on each side of blind, total of 1/2 inch on inside mounted blinds to allow for mounting brackets.
Please be sure to measure exactly as instructed BUT NOT TAKE OFF ANYTHING FROM THE MEASUREMENTS TO ALLOW FOR FREE SPACE since we automatically take deductions from the measurements on your order to provide for this free space.
If you are planning to do a flush mount, please ensure that you have the space required to do so--you'll find the 'Flush mounting space required' under the Features tab for your blinds.
Height
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three places.
Take the largest of the three measurements.
Write down that size making sure that it is the second number of the measurement. This is the height you will order.
*width and length measurements may vary +/- 1/8”
Width
Measure the exact width (left to right) of the wooden or metal window frame or how wide you would like the blind to be.
Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 36", it might be helpful to order 40". This will provide 2" coverage on each side of the window.
There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening.
Keep in mind that the valance will be about 2” wider than width ordered.
Write down that size making sure that it is the first number of the measurement. This is the width you will order.
Height
Measure the height you would like the blind to be by measuring top to bottom.
We recommend adding about 3 or 4 inches to this number to insure maximum light gap coverage and to cover the window completely.
Please be sure to know that the height measurement will always include the headrail. Example: if the height ordered is 50” this will be the height including the headrail (from the very top of the headrail to the bottom rail).
You will want to mount the headrail above the window frame. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
Headrail is 2.25” in height.
*width and length measurements may vary +/- 1/8”
professional measuring & installation service
Would you like a professional to measure your windows before you order your blinds?
